Drywall Calculator
Estimate drywall sheets, screws, joint compound and tape for walls and ceilings.
Drywall sheets
- Surface area
- sq ft
- Drywall screws
- Joint compound
- gallons
- Joint tape
- ft
- Estimated sheet cost
Sheets
Calculate wall area (perimeter × height), add the ceiling if you are covering it, subtract doors and windows, then divide by the sheet area: 32 sq ft for 4×8, 40 sq ft for 4×10 and 48 sq ft for 4×12. Longer sheets mean fewer seams and less taping.
Supplies rule of thumb
- Screws: about 1 per square foot of drywall.
- Joint compound: about 1 gallon per 90 sq ft for three coats.
- Paper tape: about 370 ft per 1,000 sq ft.
Which drywall type?
Use ½ inch standard board for walls, ⅝ inch or sag-resistant ½ inch for ceilings, moisture-resistant board in bathrooms, and ⅝ inch Type X where fire rating is required (such as garage walls shared with the house).
Last updated
Drywall Calculator by room and size
Basement
Bedroom
Dining Room
Garage
Home Office
Kitchen
Living Room
Frequently asked questions
How many sheets of drywall for a 12x12 room?
Walls and ceiling of a 12 ft × 12 ft room with 8 ft walls need about 17 of 4×8 drywall, including 10% waste.
How much does drywall for a 12x12 room cost?
Sheets alone cost about $272 at $16 each. Screws, mud and tape usually add another 15–20%.